Goulds GT303, 3 HP IRRI-GATOR Self-Priming Centrifugal Pump, 230/460 V, 3 Ph

Description

Goulds GT303, IRRI-GATOR Self-Priming Centrifugal Pump, 3 HP, 230/460 Volt , 3 Phase
This GT centrifugal pump, capable of repriming up to 25 feet suction lift, is engineered with a back pull out design that allows for easy service,
Features
Self-priming design - once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe
Back pullout design allows disassembly of pump for service without disturbing piping
Two compartment motor for easy access to motor wiring and replaceable components
Bolt down diffuser (guidevane) provides positive alignment with impeller. F.D.A. compliant, injection molded, glass filled Lexan for durability and abrasion resistance
Corrosion and abrasion resistant, glass filled Noryl impeller, F.D.A. compliant
Electro-coat paint process is applied inside and out, then baked on for corrosion resistance
Cast iron casing, 4-bolt, back pull-out design. Openings for vacuum gauge and casing drain
Powered for continuous operation
Rated within the motor manufacturer's recommended working limits
Can be operated continuously without damage
Mechanical seal with carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts
Diaphragm prevents the seal from running dry
NEMA standard open drip proof motor
Stainless steel shaft
Overload protection must be provided in starter unit
Starter and heaters (3) must be ordered separately
Applications
Lawn sprinkling
Irrigation
Air conditioning systems
Heat pumps
Water transfer
De-watering
Specifications:
Brand: Goulds
Mfg. Number: GT303
Series: GT Irri-gator
Product Type: Centrifugal Pump
Application: Residential water systems
Horsepower: 3 HP
Voltage: 230/460 Volts
Phase: 3
Frequency: 60 Hz
Speed: 3500 rpm
Suction Connection: 1-1/2" NPT
Flow at 5 ft (20 psi): 105 gpm
Flow at 10 ft (20 psi): 100 gpm
Flow at 15 ft (20 psi): 88 gpm
Flow at 20 ft (20 psi): 76 gpm
Pump Casing: Cast iron
Flow at 25 ft (20 psi): 60 gpm
Impeller Material: Glass filled noryl
Discharge Connection: 1-1/2" NPT
Maximum Flow: 110 gpm
Maximum Head: 128 ft
Maximum Water Temperature: 140°F
Thermal Protection: No
Length: 21-3/16
Width: 8-1/4"
Height: 9-1/4"